SoloPro push camera system – CCS40
SoloPro push camera system – CCS40
The SoloPro+ push camera system provides you with everything you need to inspect DN50 – DN450 pipes, document your results and generate reports for handover or further process them with the integrated damage catalogs and WinCan interface in the office software.
With the pan and rotate camera head and the lateral pin you are able to examine complete pipe systems with branches. Thanks to the integrated Li-Ion batteries even up to 6 hours independent of external power supplies.
Optionally available for EX zone 1.
Characteristics
Control panel CCU210
The intuitive control unit of the SoloPro Plus shows real-time recordings on the 8″ daylight-capable TFT-LCD display, records up to 90 hours of video material on the internal memory and has industry standard reporting software with the ProPipe. This enables users to create professional and detailed on-site reports for their customers. The quick and easy to use ProPipe Report software automatically generates a diagnostic report of the inspection performed.
- with 8″-TFT monitor (800×600) and 1 operating joystick
- for the functions of the pan/rotary camera
- Li/ion battery (up to 6 h) and mains operation (110-230VAC)
- Data and meter display with waterproof keyboard and intuitive hotkeys, IP54 device
- menu-controlled MPEG4 video and JPEG photo recording on integrated 32 GB memory (up to 128 GB)
- 3x digital zoom, light control, switchover for locating transmitters (512/640Hz and 33kHz)
- Interfaces: USB2.0 and SD/SDHC reader for data transfer and WLAN (data exchange)
- Simple, intuitive ProPipe reporting software for creating detailed on-site reports
- integrated WinCan module for inspection with catalogues according to DWA M149 and ISYBAU2006, 2001 and 1996
- No office software required for report generation or data output (video, photo, PDF)
- After inspection, the posture protocol is generated on the control unit, output via USB stick or SD card.
40 m Coiler
- Reel with sturdy steel frame and robust kink-resistant special push cable (11mm)
- integrated electronic meter counter
- Comfortable friction brake
- Bracket for SOLO-PRO Plus control unit
- Multi-location transmitter for 512/640Hz and 33kHz integrated in camera plug
- tool-free camera connection system
Axial camera CAM025 SL (self-levelling)
- for the inspection of nominal pipe sizes DN50 to DN225 (bends from 75mm)
- VA housing with spring connection
- 1bar pressure tight
- LED lighting and scratch-resistant front glass
- Resolution: 512×582 (PAL)
- Sensitivity <1.0Lux
- incl. transport case, tools, 3 sliding balls
Pan & tilt camera Cam026L
- Use in push operation in DN90 to DN450 (with optional accessories)
- 90° bendable from DN100
- Laser with 2 parallel lasers for crack width measurement
- 1 rotary laser for diameter determination
- Water level measuring module
- robust construction with exchangeable rubber impact protection and protection slide
- detachable spring adapter (VA)
- automatic position correction (upright image)
- 360° endless rotation, swivel range (+/-135°)
- 300,000 pixels (PAL 512×582 lines) < 1.0 Lux Manual focus, auto shutter, 75° viewing angle
- powerful, swivelling LED light
- Accessories: Transport case with set of tools, set of rods (3 parts) and sliding carriage (mogul) from DN150
Ordering Information
Gewicht: 15.0
Gewicht: 15.0
Gewicht: 15.0
Gewicht: 15.0
Gewicht: 15.0
Gewicht: 15.0
